 錐形齒輪減速機
|
|
V型
• 貫穿軸，低轉速
• 減速比： i = 1:1 至 6:1
• 最大輸出扭矩至 T2 max = 5400 Nm
• 9個減速機尺寸，從邊長35至 350 mm
- Continuous shaft, slow running
- Transmission ratios: i = 1:1 to 6:1
- Max. output torque up to T2 max = 5400 Nm
- 11gear unit sizes from 35 to350 mm edge length |
|
|
VS型
• 貫穿軸，高轉速
• 減速比： i = 1,5:1 和 2:1
• 最大輸出扭矩至 T2 N = 650 Nm
• 6個減速機尺寸，從邊長 090 至 260 mm
- Continuous shaft fast running
- Transmission ratios: i = 1.5:1 und 2:1
- Rated output torque up to T2 N = 650 Nm
- 6 gear unit sizes from 090 to 260 mm edge length |
|
|
VL型
• 驅動端配有電機外殼和空心軸
• 可與IEC標準電機匹配
• 貫穿軸，低轉速
• 減速比、扭矩和尺寸同V型產品
- Drive end with motor bell housing and hollow shaft
- Compartible for installation of IEC standard motor
- Continuous shaft, slow running
- Transmissionratios, torques and sizes like type V |
|
|
VLM型
• 配有IEC標準電機
• 輸出轉速 112 至 2850 min-1
• 最大輸出扭矩至 T2 max = Nm
- With IEC standard motor
- Output speed 112 to 2850 min-1
- Max. output torque up to T2 max = 5400 Nm |
|
|
多軸減速機 / Multi shaft gearboxes
• 減速比從1.5至6:1（V型）
• 減速比從1.5至2:1（VS型）
• 配有實心或空心軸
• 軸端多達6個
- for ratios from 1.5 to 6:1 for type V
- for ratios from 1.5 to 2:1 for type VS
- with solid shaft or hollow shaft
- up to 6 shaft ends |
伺服減速機
|
|
VC型
• 與伺服電機匹配的錐形減速機
• 驅動側配方形法蘭和緊固聯軸器
• 貫通軸，低轉速
• 減速比：i=1:1至6:1
• 加速扭矩至T2B=700 Nm
• 最小圓周尺側間隙
• 高扭轉剛度
• 6個減速機尺寸，邊長65至200 mm
• 輸入轉速高達n1=6000 min-1
- Bevel gearboxes compartible for installation on servo motors
- Drive end with square flange and clamping coupling
- Continuous shaft, slow running
- Transmission ratios: i = 1:1 to 6:1
- Acceleration torques up to T2B = 700 Nm
- Minimum circumferential backlash
- High torsional rigidity
- 6 gear unit sizes from 065 to 200 mm edge length
- Input speeds up to n1 = 6.000 1 / min |
|
|
SLC型
• 與伺服電機匹配的錐形減速機
• 驅動側配方形法蘭和緊固聯軸器
• 高效率
• 減速比：i=5:1至26:1（i>26時請咨詢）
• 加速扭矩至T2B=1100 Nm
• 最小圓周尺側間隙
• 高扭轉剛度
• 5個減速機尺寸，中心矩40至100 mm
• 輸入轉速高達n1=6800 1/min
- Worm gearboxes compartible for installation on servo motors
- Drive end with square flange and clamping coupling
- High efficiency
- Transmission ratios: i = 5:1 bis 26:1 (i > 26 please ask)
- Acceleration torques bis T2B = 1100 Nm
- Minimum circumferential backlash
- High torsional rigidity
- 5 gear unit sizes from 040 to 100 mm centre distance
- Input speeds up to n1 = 6.800 1 / min |
蝸輪蝸桿減速機
|
|
S型
• 自由驅動和輸出軸
• 額定減速比： i = 05:1 至 83:1
• 最大輸出扭矩達 T2 max = Nm
- Free drive and output shafts
- 9 from axle base sizes a = 040 to 250 mm
- Nominal transmission ratios: i = 05:1 to 83:1
- Max. output torque up to T2 max = 113Nm
|
|
|
SL型
• 驅動端配有電機罩和聯軸器
• 可與IEC標準電機匹配
• 9個中心距尺寸 a = 040 至 250
• 減速比和扭矩同S型產品
- Drive side with motor latern and coupling
- Compartible for installation on IEC standard motor
- 9 from axle base sizes a = 040 to 250 mm
- ratios and torques like type S |
|
|
SLM型
• 配有IEC標準電機
• 輸出轉速 為 8 至 555 min-1
• 最大輸出扭矩達 T2max =13720 Nm
• 9個中心距尺寸 a = 040 至 250mm
- With IEC standard motor
- Output speed 8 - 555 min-1
- Max. output torque up to T2 max = 13720 Nm
- 9 axle base sizes from a = 040 to 200 mm |
|
|
雙蝸輪蝸桿減速機
Double Worm Gearboxes
• - 可對S、SL、SLM和SLC型產品進行組合
• - 9個標準組合尺寸
• - 減速比可達6890:1
• - 輸出轉速0.1至8 min-1
- Connection gearbox like as type S, SL, SLM and SLC available
- 9 standard combinations size available
- for transmission ratios up to 6890:1
- Output speed 0,1 to 8 min-1 | |
