公司簡介
臺灣成鋼企業股份有限公司創立於西元1978年7月。工廠位於桃園縣蘆竹鄉，從事生產電機及相關零組件、汽機車零件並和臺灣裕隆汽車、松下電機、大同公司、東元電機等國際知名集團建立供銷關係訖今。西元1998年在大陸投資生產6W-2200W微型、小型齒輪減速機、變速馬達提供中國市場。在西元2002年成立「成鋼電機（廈門）公司」。於西元2005年9月於泰國曼谷設立「成鋼電機（泰國）公司」并設組裝廠，以因應東南亞市場。
產品已通過CE、ISO9001：2000國際認證及大陸地區3C認證。
產品具有壽命長、無噪聲、體積小、重量輕、免保養、價格低等特點：
一.齒輪材質採用SCM-415(鉻目合金鋼)配合滲碳硬化處理確保材質韌性(齒面硬，齒根韌)，不脆化經得起瞬間衝擊(非常規採用S45C鋼經熱處理,材質脆化)；
二.齒輪精度高,達到三級以內，齒輪間隙0.02M/M以內,咬合面大又深,更耐沖擊壽命更長(一般品牌精度3-6級,間隙0.5M/M左右）；
三.全系列產品采用滾珠軸承,壽命更長效率更高.(一般品牌多采用含油合銅傳動，易偏心，不耐磨)；
四.可替代擺線針輪減速機，可替代臺灣、日本及韓國同類產品；
五.產品價格保證最合理，全系列產品正常使用下三個月內免費換新，一年內免費維修，電話到，服務到。
公司銷售的產品有：
一.交流/直流調速、剎車齒輪減速馬達，功率6W-2200W，速比1/3-1/1800；
二.立式/臥式、剎車齒輪減速馬達，功率0.1KW-2.2KW，速比1/3-1/1800；
三. 其他臺灣、日本、韓國及國內優質傳動產品（調速器、變頻器、離合\剎車器、無極變速器、線型滑軌、聯軸器、高壓風機、蝸輪減速機、漲套、馬達軸心、自動噴槍、伺服電機等）。
Bay steel motor center in Shanghai / Shanghai Chengwu industry and Trade Co., Ltd.
Taiwan steel company Limited by Share Ltd was founded in 1978 July. Factory is located in Taoyuan County Lujhu Township, engaged in the production of motor and its related components, automobile and motorcycle spare parts and Taiwan Yulon motor, Panasonic, Tatung company, East yuan motor and other international well-known group to establish a supply and marketing relationship until now. Provide Chinese market in 1998, investment in production of 6W-2200W micro, small gear reducer, gear motor. In 2002 the establishment of the "steel motor (Xiamen) ltd.. In 2005 September in Bangkok Thailand set up a "Gang electric (Thailand) Company" and set up the assembly plant, due to the Southeast Asian market.
Products have passed CE, ISO9001:2000 international certification and China 3C certification.
The product has the advantages of long service life, no noise, small size, light weight, maintenance free, low price etc.:
A gear made of SCM-415 (CR target alloy) with carburizing hardening ensure that material toughness (tooth root hard, tough), not brittle can withstand the shock (non conventional S45C steel after heat treatment, the material embrittlement);
Two. The accuracy of the gear is high, reaching three level within the gear clearance, within 0.02M/M, the occlusal surface of large and deep, more resistant to impact life (general brand Precision Grade 3-6, 0.5M/M gap);
Three. The whole series of products using ball bearings with higher efficiency, longer life. (general brand used copper to oil transmission, eccentric, not wear);
Four. Alternative cycloid pin wheel reducer, can replace the Taiwan, Japan and South Korea similar products;
Five. To ensure the most reasonable price, the whole series of products under normal use within three months of free trade, one year free repair, telephone, service to.
Sales of products:
An AC / DC speed control, brake, gear motors, power 6W-2200W, velocity ratio 1/3-1/1800;
Two. Vertical / horizontal, brake gear reducer motor, power 0.1KW-2.2KW, velocity ratio 1/3-1/1800;
Three. Other Taiwan, Japan, South Korea and the domestic high-quality transmission products (governor, frequency converter, clutch, brake, Wu Ji transmission, linear slide, coupling, a high pressure blower, worm gear reducer, the expansion sleeve, motor shaft, automatic spray gun, servo motor etc.).