 軋鋼機減速器泛指完成軋材生產全過程的裝備﹐包括有主要設備﹑輔助設備﹑起重運輸設備和附屬設備等。
根據用途和結構可分為330、350、380、400、420、450、475、500、560、620、750、800等多種規格的高速線材、棒材軋機減速機，包括水平軋機、立輥軋機、平立可換軋機減速機及配套的傘齒輪箱等，并且可以根據用戶要求進行不同規格、不同結構的高速線材、棒材軋機減速機的設計與研制。
軋鋼機專用減速器的工作特點是低速、重載，沖擊負荷大，沖擊次數頻繁，而且是連續工作。隨著我國軋鋼工業的迅速發展，鋼材品種的不斷擴大，產量的增加，軋制速度的提高，軋制負荷增大，要求軋機齒輪傳動裝置具有足夠的承載能力，即具有高強度、高精度、高壽命和高可靠度。因此，現代大中型軋機齒輪裝置一般都采用經精加工的硬齒面和中硬齒面漸開線圓柱齒輪，并采用輪齒修形、深層滲碳、噴丸強化等設計制造技術。
Rolling mill gear reducer refers to the entire process of rolling production equipment, including the main equipment, auxiliary equipment, lifting and transportation equipment and ancillary equipment.
According to the purpose and structure can be divided into 330, 350, 380, 400, 420, 450, 475, 500, 560, 620, 750, 800, etc. Various specifications of the high speed wire rod and bar mill reducer, including horizontal mill, vertical mill, vertical mill reducer may be substituted, and form a complete set of bevel gear box, etc., and can according to user requirements for different specifications, different structure of high speed wire rod and bar rolling mill reducer design and development.
The working characteristics of the special reducer for rolling mill are low speed, heavy load, large impact load, frequent impact times and continuous work. With the rapid development of steel rolling industry in China, the continuous expansion of steel varieties, the increase of output, the improvement of rolling speed and the increase of rolling load require the mill gear transmission device to have enough bearing capacity, that is, high strength, high precision, high life and high reliability. Therefore, the gear device of modern large and medium-sized rolling mill generally adopts the precision-machined hard tooth surface and the involute cylindrical gear of middle and hard tooth surface, and adopts the design and manufacture technology of gear modification, deep carburizing, shot peening and so on. |
